[Config]
Name=BHB07601

# about ASIC
AsicType=1397
AsicNum=48

OpenCoreGap=20000

# Bit[0] SWPF_MODE
# Bit[1] Reserved
# Bit[2] MMEN
# Bit[3] HASH_CLKEN
# Bit[5:4] PWTH_SEL
# Bit[7:6] CCDLY_SEL
CoreClockDelay=0xb4

# test how many patterns, max is 8
pattern_number=8

# permit how many ASICs not receive all nonces
Invalid_Asic_Num=48

# permit how many Cores not receive all nonces
Invalid_Core_Num=84

# the least nonce number per core get
Least_nonce_per_core=7

# the most HW number
Most_HW_Num=128

# timeout_percent
timeout_percent=10

# voltage accuracy
Voltage_accuracy=10000

# baud rate
# 0: 3M
# 1: 1.5M
# 2: 921600
# 3: 6M
# 4: 12M
# 5: 25M
# 6: 460800
# 26: 115200
baudrate=3

# io_strength
io_strength=0x2172111

# 0: pattern test
# 1: only find asic
Only_find_ASIC=1

# frequence
Freq1=550
Freq2=550
Freq3=0
Freq4=0
Freq5=0
Freq6=0
Freq7=0
Freq8=0
Freq9=0

# voltage
pre_open_core_voltage=2000
Voltage1=1850
Voltage2=1800
Voltage3=0
Voltage4=0
Voltage5=0
Voltage6=0
Voltage7=0
Voltage8=0
Voltage9=0

#sensor model
#1:TMP451
#2:TMP461
#3:TMP421
#4:TMP431
#5:ECT218
#6:TMP411B
#7:TMP411C
sensor_model=1

# Temperature sensor address, 0: no sensor
TempSensor1=9
TempSensor2=12
TempSensor3=40
TempSensor4=37

StartSensor=12
StartTemp=0
TargetTemp=100
AlarmTemp=105
HeatingUpTime=120
MaxTempGap=30

# fan speed, 0 is min, 10 is max
fan_speed=10

# test single ASIC to open which core
Open_Core_Num1=0
Open_Core_Num2=10
Open_Core_Num3=FFFFFFFF
Open_Core_Num4=FFFFFFFF
Open_Core_Num5=FFFFFFFF
Open_Core_Num6=FFFFFFFF
Open_Core_Num7=FFFFFFFF
Open_Core_Num8=FFFFFFFF

# version info
HashBoard_Hardware_Version_1=1
HashBoard_Hardware_Version_2=1
HashBoard_Bom_Version_1=1
HashBoard_Bom_Version_2=3
HashBoard_Product_ID=1

# whether we should add a voltage gap after test ok. 0:no ; 1:yes
add_voltage_after_test_ok=0

# add how much voltage after test ok if we need add. 10 = 0.1v
add_voltage_value=10

# 1 is repair mode (do not overwrite cgminer eeprom info)
repair_mode=1

# 1 is dump all lost nonce
Dump_Lost_Nonce=0

# If nonece% >= bad_chip_nonce_rate%, the chip is bad
bad_chip_nonce_rate=75

# If bad chip num >= bad_chip_num, will stop test
bad_chip_num=1
