[Config]
Name=BHB07702
Asic_Type=1397
Asic_Num=44

# clock delay
# Bit[0] SWPF_MODE
# Bit[1] Reserved
# Bit[2] MMEN
# Bit[3] HASH_CLKEN
# Bit[5:4] PWTH_SEL
# Bit[7:6] CCDLY_SEL
CoreClockDelay=0x34
#PWTH_SEL=3
#CCDLY_SEL=0

# test how many patterns, max is 8
Pattern_Number=8

# permit how many ASICs not receive all nonces
Invalid_Asic_Num=44

# permit how many Cores not receive all nonces
Invalid_Core_Num=128

# the least nonce number per core get
Least_Nonce_Per_Core=7

# the most HW number
Most_HW_Num=128

# timeout_percent
Timeout_Percent=90

# baud rate
Baudrate=6000000

# 0: pattern test
# 1: only find asic
Only_find_ASIC=0

# frequence
Freq1=700
Freq2=680
Freq3=630
Freq4=630
Freq5=700
Freq6=680
Freq7=600
Freq8=550
Freq9=0

# voltage
Open_Core_Voltage=1850
Voltage1=1750
Voltage2=1770
Voltage3=1750
Voltage4=1780
Voltage5=1730
Voltage6=1750
Voltage7=1800
Voltage8=1830
Voltage9=0

#test sequency
Step1=2
Step2=4
Step3=3
Step4=7
Step5=8
Step6=1
Step7=5
Step8=6
Step9=0

#sensor model
#1:NCT218
Sensor_Model=1
Start_Temp=0
Alarm_Temp=100
Heat_Time=60

# fan speed, 0 is min, 100 is max
Fan_Speed=100

# wait time before close power
Close_Power_Delay=1

# version info
Hardware_Version_1=1
Hardware_Version_2=0
Bom_Version_1=1
Bom_Version_2=0
Product_ID=0

# 1 is repair mode (do not overwrite cgminer eeprom info)
Repair_Mode=0

# 1 is dump all lost nonce
Dump_Lost_Nonce=0

# If nonece% >= bad_chip_nonce_rate%, the chip is bad
bad_chip_nonce_rate=75

# If bad chip num >= bad_chip_num, will stop test
bad_chip_num=1

# max voltage diff for voltage check, 100 means 1v, 50 means 0.5v
voltage_diff=50

# dump pm data test, 0: disable, 1: enable
check_pm=0

# use bar code gun to scan QR code and SN, 0: disable, 1: enable
scan_qr_code=0

# use this flag to adpat different test case, 0: single board test, 1: multi hashboards on the miner machine, but test the hashboard one by one
Multi_board_case = 0

# 1 enable upload log file to ftpserver, 0 disable it
Upload_log_switch=1
